Ceruloplasmin (CP) BioAssay(TM) ELISA Kit (Human)

Ceruloplasmin (CP) BioAssay(TM) ELISA Kit (Human) is a sandwich enzyme immunoassay for in vitro quantitative measurement of CP in human serum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids. Detection Range: 15.6-1000ng/ml, Sensitivity: 7.4ng/ml, Intra-Assay: CV <10% , Inter-Assay: CV <12%, Kit Components: *024062A: Microtiter Strips, 1x96 wells, Pre-coated, ready to use, *024062B: Standard, 2x1 vial, 024062C: Standard Diluent, 1x20ml, *024062D: Detection Reagent A, 1x120ul, *024062E: Detection Reagent B, 1x120ul, 024062F: Assay Diluent A, 1x12ml, 024062G: Assay Diluent B, 1x12ml, 024062H: TMB Substrate, 1x9ml, *024062J: Positive Control, 192.8ng/ml, 1x1 vial, 024062K: Stop Solution, 1x6ml, 024062L: Wash Buffer, 30X, 1x20ml, Precaution: The Stop Solution (024062K) included for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material. Storage and Stability: Store *024062A, *024062B, *024062D, *024062E and *024062J at -20°C. After reconstitution of *024062J, store at 4°C and use within 5 days. Store all the other components at 4°C. Unused kit is stable for 6 months after receipt. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap. Assay Procedure Summary: 1. Prepare all reagents, samples and standards., 2. Add 100ul standard or sample to each well. Incubate 2 hours at 37°C., 3. Aspirate and add 100ul prepared Detection Reagent A. Incubate 1 hour at 37°C., 4. Aspirate and wash 3 times., 5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37°C., 6. Aspirate and wash 5 times., 7. Add 90ul TMB Substrate. Incubate 15-25 minutes at 37°C., 8. Add 50ul Stop Solution. Read at 450nm immediately. Notes on 024062J: Positive Control: , Intended Use:, The control vial is from a human serum sample known to contain CP. It will provide a positive result in the ELISA assay, which indicates that the kit is optimized and working properly. Characteristics: The control vial contains human CP in human serum (lyophilized powder). Note: The human source material used in this product is screened for HIV, Hepatitis A, B, C, HTLV and Syphilis. Expected Values: 192.8ng/ml, Usage: Dissolve with 150ul standard dilutent and let stand for 10 minutes. If powder is partly insoluble, shake gently until fully dissolved. Mix gently before use. In the experiment, add 100ul to an appropriate well of the plate and test its concentration along with standards and your specimens. Note: Upon receipt store Positive Control vial at -20°C. After reconstitution, store Positive Control vial at 4°C and use within 5 days.