AMY1 (Amylase Alpha 1, Salivary) BioAssay(TM) ELISA Kit (Human)

Sample Type:, Serum, Plasma, Biological Fluids, Intended Use: This BioAssay(TM) kit is a sandwich ELISA for in vitro quantitative measurement of AMY1 in human serum, plasma and other biological fluids, Sensitivity: 0.938ng/mL, Range: 1.563-100ng/mL, Specificity: Human, Test Principle: This BioAssay(TM) ELISA kit uses Sandwich-ELISA as the method. The micro ELISA plate provided in this kit has been pre-coated with an antibody specific to human AMY1 (Amylase Alpha 1, Salivary). Standards or samples are added to the appropriate micro ELISA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for human AMY1 (Amylase Alpha 1, Salivary) and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain human AMY1 (Amylase Alpha 1, Salivary), biotinylated detection antibody and Avidin-HRP conjugate will appear blue in color. The enzyme-substrate reaction is terminated by adding Stop Solution and the color turns yellow. The optical density (OD) is measured spectrophotometrically at a wavelength of 450 nm ± 2 nm. The OD value is proportional to the concentration of human AMY1 (Amylase Alpha 1, Salivary). The concentration of human AMY1 (Amylase Alpha 1, Salivary) in samples can be calculated by comparing the OD of the samples to the standard curve. Kit Components: Microtiter Strips, 8x12 wells, Standard, 2 vials, Sample/Standard Diluent Buffer, 1x20ml, Antibody-Biotin, 1x120ul, Antibody-Biotin Diluent, 1x10ml, HRP Conjugate, 1x120ul, HRP Conjugate Diluent, 1x10ml, Substrate Reagent, 1x10ml, Stop Solution, 1x10ml, Wash Buffer (25X), 1x30ml, Storage and Stability: Unused kit is stable for 6 months after receipt.  Store Microtiter Strips, Standard, and Antibody-Biotin at 4°C if kit will be used within 30 days, otherwise store at -20°C until expiration date. Store the rest of the components at 4°C. Protect HRP Conjugate and Substrate Reagent from light. For maximum recovery, centrifuge the original vials after thawing and prior to removing the cap.